Application of IEEE STD 1394 in the Peripheral Interface IEEE1394协议在外设端接口中的应用
SPI communication between microprocessor and A/ D module is realized by using serial peripheral interface module SPI of MC68HC908GZ60 microprocessor. 利用MC68HC908GZ60微处理器的串行外围接口模块SPI,实现微处理器与A/D模块之间串行通讯。
High speed novel ADC chip configuration based on Serial Peripheral Interface 基于SPI协议的新型高速ADC芯片配置
The System can collect and release the information of OBU and peripheral interface, and the test results show that the system meets the design requirements and runs stable. 系统能对OBU和外围接口的各种状态信息进行采集和发布,通过测试达到了设计要求,运行稳定。
The serial peripheral interface ( SPI) is a standard communication protocol, which is used in many fields. 串行SPI通信协议是一种标准的通信协议,很多场合下都是采用这种机制。
Design and Implement of Serial Peripheral Interface Based on CPLD 基于可编程逻辑器件的串行外设接口设计及实现
Design of Custom High-speed Serial Peripheral Interface in Multiple FPGA System 多FPGA系统中自定义高速串行数据接口设计
The data exchange specification via peripheral interface of mobile terminal aims to make the data exchange between different terminals realizable. 《数字移动终端外围接口数据交换》标准的推出,解决了数据交换过程中互不兼容的问题。
The system work principle and the function requests of the vehicle control system are analyzed, the vehicle control system based on the microprocessor is designed, and the CPU unit electric circuit and peripheral interface electric circuit are also designed. 分析了车控系统工作原理和功能要求,设计了微处理器的车控系统,以及CPU单元电路、外围设备接口电路。
The hardware design of the control system mainly includes the composing of the DSP controller, the realization of the peripheral interface circuit, etc. 控制系统硬件设计主要介绍TMS320LF2407系统构成和外围接口电路的实现等;
Research and Realization on the VLSI Design Critical Technologies of Microprocessor Systems Peripheral Interface Controllers 微处理器系统外设接口控制器的VLSI设计技术研究与实现
SPI ( Serial Peripheral Interface) is a kind of 3 lines contact interface. SPI(SerialPeripheralinterface)串行外围设备接口是一种3线同步串行全双工通信接口。
After the serial peripheral interface ( SPI) was used to implement communication of Arm processor with CAN controller. CAN-Bus driver program and application program in Arm-Linux embedded system were designed, and the graphical user interface ( GUI) based on Arm-Linux was developed. Arm处理器以同步外设接口(SPI)方式与CAN控制器相通信,开发了Arm-Linux嵌入式系统下的CAN-Bus驱动及应用程序,且设计了嵌入式环境下图形界面系统(GUI)。
Design of Peripheral Interface Based on FPGA and ARM Core Processor 基于FPGA和ARM核处理器的外设接口
The system adopts MCU as the control core, provides with the peripheral interface chip used widely nowadays and leads in the ISP technique. So it can carry out the system upgrade very conveniently. 系统采用单片机作为控制核心,配备了当今较为常用的外围接口芯片,并引入了在系统编程技术(ISP),可以十分方便的实现系统升级。
The loadability of the software serial peripheral interface is on data transmission rate. 在此基础上从传输速率等方面理论论证了软件SPI口对相应芯片的负载能力。
The Asynchronous Data Communication Protocol and IEEE 1284 standard signaling method for a bidirectional parallel peripheral interface are analyzed. 研究分析了异步串行通信协议和IEEE1284标准并行通信协议。
Taking use of the card's DO/ AI function and through the peripheral interface circuit, circuit controlling and data acquisition can be achieved simply and effectively. 利用采集卡的数字量输出与模拟量输入功能,配以外围接口电路,有效地实现了对电路的控制和对所需数据的采集,同时能对十工位PTCR的伏安特性进行测量。
Announced in 1994, USB has become the standard peripheral interface of PC. USB出现于1994年,如今已经成为PC的标准外设接口。
Universal Serial Bus ( USB) is a new generation of the standard peripheral interface bus. USB通用串行总线是新一代标准接口总线。
The General Purpose IO Interface is a very important peripheral interface in SoC chips. 通用IO接口是SoC系统中非常重要的一种外围端口。
The hardware design scheme is discussed in detail in this thesis, which includes power monitoring module, storage module, CPLD module, peripheral interface circuit module and communication module. 文章随后详细论述了硬件平台的构建方案,包括电源监控模块、存储器模块、CPLD模块、外围接口电路模块和通讯模块。
This paper focuses on the designs of PXI bridge interface circuit and other peripheral interface circuit. 该设计部分重点阐述了PXI桥接口电路及各种外围接口电路的设计。
On this basis the completion of the Ethernet port, serial peripheral interface, such as the design and preparation of the driver was successfully integrated with the minimum system constituted in one hardware system. 在此基础上完成了以太网口,串口等外围接口的设计,并为之编写了驱动程序成功与最小系统构成完整的硬件系统。
Thirdly, we realize the engineering of the car-borne directional antenna tracking system. Including the modular design of the system controller, such as power modules, peripheral interface modules, analog input and output modules, then we complete a system software design and debugging work. 第三,研究了智能车定向天线跟踪系统的工程实现,包括系统控制器的模块化设计,如电源模块、外围接口模块、模拟量输入输出模块等,并完成了系统软件设计和调试工作。
Especially, DSP chips include abundance of peripheral interface and have very high programmed ability, which make the hardware and software of video surveillance system be implemented easily. 尤其是DSP芯片,它丰富的外设接口和高度的可编程性使得视频监控的硬件和软件都更容易实现。因此,本文对基于DSP的视频监控系统集成平台的设计进行了研究。
The Low-level drivers of the ECU peripheral interface module were designed and implemented with the modular design concept. 采用模块化的设计思想,设计并实现了ECU外围接口电路中各模块的底层驱动程序。